(972) 802-8898
Pricing & ROIMay 10, 2026 · 6 min read

Shower Remodel Cost in Dallas-Fort Worth: Walk-In, Conversion & Tile Work Pricing

Shower remodel cost in Dallas-Fort Worth ranges from $4,000 for a targeted cosmetic refresh to $20,000+ for a full custom tile shower with steam and frameless glass. The single most common shower project in DFW is the tub-to-shower conversion — removing an existing tub/shower combo and replacing with a dedicated walk-in tile shower. At $8,000-$14,000, this is one of the highest-visual-impact renovations per dollar in a master bath.

DFW Shower Remodel Costs by Scope

ScopeDFW Cost RangeWhat Is Included
Shower liner replacement (acrylic)$2,500 - $5,000New acrylic surround over existing walls; no tile demo
Full tile demo and re-tile$4,000 - $8,000Demo existing tile, new waterproofing, new tile, no glass change
Tub-to-shower conversion (basic)$6,000 - $10,000Remove tub, new tile shower with curtain or basic door
Tub-to-shower conversion (frameless glass)$8,000 - $14,000Walk-in tile shower, frameless glass enclosure, linear drain
Full custom shower (no steam)$10,000 - $18,000Large format tile, niche, bench, frameless glass, custom tile pattern
Luxury shower (steam, rainfall, body jets)$18,000 - $30,000+Custom everything, steam generator, multiple shower heads, digital controls

What Drives DFW Shower Remodel Cost

  • Tile selection and size: Standard ceramic tile in a 12x24 format runs $3-$6/sq ft material. Porcelain large format (24x48) is $6-$14/sq ft. Natural stone (marble, travertine) is $10-$25/sq ft. Labor to install large format tile costs more due to the skill required to maintain lippage below 1/16".
  • Waterproofing system: Proper waterproofing is the most important thing in a shower — and the thing homeowners cannot see. Budget contractors skip or minimize this step; the result is water infiltrating the wall framing within 3-5 years. Specify a liquid-applied membrane system (RedGard, Mapei Aquadefense, or similar) on all surfaces.
  • Drain type: A standard point drain costs $150-$400. A linear drain (required for curbless/barrier-free showers) costs $300-$800 for the drain itself plus additional tile layout cost. Curbless showers require the floor to slope from all directions to the drain — more labor.
  • Frameless glass enclosure: The single biggest cost driver after tile. A frameless glass shower door and panel runs $1,800-$4,500 depending on size, glass thickness (3/8" vs. 1/2"), and hardware finish. Semi-frameless (center panel frameless, door framed) runs $1,200-$2,500.
  • Plumbing reconfiguration: Moving the shower valve, drain, or supply lines requires cutting the slab. Add $2,000-$5,000 for each drain move in a DFW slab foundation home.
  • Niche and bench: A built-in tile niche costs $400-$800 installed. A shower bench (tile-faced concrete board bench or prefab teak) runs $500-$1,500.

Tub vs. Walk-In Shower: What DFW Buyers Want

The conventional advice — "always keep a tub in the master bath for resale" — is increasingly outdated in DFW's market. In homes with a dedicated guest bathroom or secondary bath that retains a tub, removing the master tub in favor of a walk-in shower is widely accepted by buyers. In a 2-bathroom home where the master bath is the only full bath, keeping a tub is still the safer choice for families with young children. In luxury DFW submarkets (Southlake, Westlake, Preston Hollow), a spa shower plus a freestanding soaking tub is the expected combination.

DFW Shower Remodel Timeline

A tub-to-shower conversion with full tile typically takes 2-3 weeks from demo to completion: demo (1 day), plumbing rough-in and waterproofing (2-3 days), tile work (3-5 days, depending on size and pattern), curing time (3-4 days minimum before grouting), grout and seal (1-2 days), glass installation (1 day, usually 3-5 weeks lead time). Custom shower glass lead time is the most common reason for project delays — order it the week you sign the contract.

Pro tipDFW's hard water (7-9 GPG) is the enemy of frameless shower glass. Mineral deposits etch into untreated glass within months. If you are investing in frameless glass, specify Diamon-Fusion or similar permanent protective coating applied at the factory. It costs $200-$400 and makes the glass dramatically easier to maintain — squeegee after each shower and it stays clear for years.

Zencore Homes handles complete shower remodels across DFW — waterproofing, tile, glass, and plumbing all in-house, no sub-coordination required.

Get a Free Shower Remodel Estimate

Ready to start your project?

We serve Dallas, Fort Worth, Plano, Frisco, McKinney, Allen, Prosper, and surrounding DFW cities. Free on-site estimate with no obligation.

Get a Free Estimate

Serving all of DFW

DallasFort WorthPlanoFriscoMcKinneyAllenProsperSouthlakeKellerRockwallArlingtonCelina

Keep reading

Free estimate · no obligation
Tell us about your project.